Share:
Function
Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and guiding elements, avoiding abrasive damage caused by external contamination.
Features
Application
Installation
Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and guiding elements, avoiding abrasive damage caused by external contamination.
Features
- The profile is designed with interference on the OD which provides a good static fit in the groove, preventing the entry of humidity and other contamination via the outside diameter.
- The design of the wiper lip supports the recirculation of the remaining oil film into the cylinder, whilst the exclusion of contamination is guaranteed.
- For housings acc. to ISO 6195-Type A.
Application
- Reciprocation rods in hydraulic cylinders, plungers.
- Max. pressure 0 bar, max. speed 4 m/s.
Installation
- Snap-in installation.
- When the cylinder can not be dismantled, the wiper can also be installed in cut version.
- In this case the diameter should be increased by 2-3%.
Inquiry - Wiper WR01
