Share:
Function
Symmetrical piston/rod seals are designed to seal the pressurized hydraulic fluid against
the atmosphere or between two pressurized spaces.
Features
Reciprocating and swivelling pistons in hydraulic cylinders, plungers.
Chemical and pharmaceutical industry, aggressive fluids and high temp.
Max. pressure 160 bar, max. speed 5 m/s linear; 0,1m/s rotating.
Installation
Installation in open housing, snap-in installation possible in special designed housings.
We recommend to maintain a nominal width/seal height ration (CS/NH) above 1/1,5.
Symmetrical piston/rod seals are designed to seal the pressurized hydraulic fluid against
the atmosphere or between two pressurized spaces.
Features
- Symmetrical, single acting seal, no interference on the ID or OD.
- For use as rod or piston seal
- Preload effected through V-spring which ensures the continious pressure on
- Retainer nose on inside and outside lip.
- Excellent static and dynamic sealing performance.
- Excellent sealing performance in low and high pressure ranges.
- Useable for short and long stroke lengths.
- Low friction in dry running or poor lubrication conditions.
- Negligible tendency to “stick-slip” effect, small break away loads.
Reciprocating and swivelling pistons in hydraulic cylinders, plungers.
Chemical and pharmaceutical industry, aggressive fluids and high temp.
Max. pressure 160 bar, max. speed 5 m/s linear; 0,1m/s rotating.
Installation
Installation in open housing, snap-in installation possible in special designed housings.
We recommend to maintain a nominal width/seal height ration (CS/NH) above 1/1,5.
Inquiry - PRS19
