Share:
Function
Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and
guiding elements, avoiding abrasive damage caused by external contamination.
Features
Reciprocation rods in hydraulic cylinders, swivelling and coiling rods, plungers.
Installation
Snap-in installation for wipers bigger 25mm otherwise a partite groove is recommended.
A large insertion chamfer needs to be provided (angle 20-30°).
Wipers are designed to keep dust, dirt, sand and others off the rod and the sealing and
guiding elements, avoiding abrasive damage caused by external contamination.
Features
- The profile is designed with two geometric different lips for wiping off any dirt on
- The wiper consists of a PTFE wiping part and an O-Ring as preload element,
- Due to the use of an O-Ring the wiper is able to compensate deflections of the rod.
- Mainly used in combination with rod seal RS09B.
- Pressure should be limited to 15bar.
- For housings acc. to ISO 6195 Type D.
Reciprocation rods in hydraulic cylinders, swivelling and coiling rods, plungers.
Installation
Snap-in installation for wipers bigger 25mm otherwise a partite groove is recommended.
A large insertion chamfer needs to be provided (angle 20-30°).
Inquiry - WR13
